D-Link Blog Home

[...] ;) To use a LAN connection, connect one end of an Ethernet cable to the network port on the access point and the other end to the same hub where your PC is connected, as shown in the following figure. [...]

[...] tab and then click LAN. Step 3: Select Dynamic (DHCP) from the drop-down list if you want the access point to receive an IP address automatically from a DHCP server or router, otherwise change the IP [...]

[...] D-Link Wireless N Unified Access Point DWL-2600AP Overview The DWL-2600AP Unified N Single-band PoE Access Point is a best-in-class [...]

[...] through the setup procedure. This will automatically connect your existing wireless router or access point to your DAP-1320. Note: For more information about using WPS on your router or access point, [...]

[...] 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video [...]

[...] , you can configure multiple VLANs on each VAP. The external RADIUS server assigns wireless clients to the VLAN when the clients associate and authenticate. You can configure up to four global [...]

[...] several D-Link DWL-7100AP/DWL-7000AP access points to balance wireless network traffic and wireless clients among the access points with the same SSID. All the APs that share Load Balancing must have [...]

[...] icons in the system tray, select View Available Wireless Networks. Step 2: Highlight your wireless network which is the SSID of your wireless network (if you are connecting to a D-Link router it will [...]

[...] Next to continue. A list of wireless networks in your area will be listed. Select your wireless network (associated with your wireless router or access point) and click Connect to continue. [...]

[...] Next to continue. 3.Press down the Push Button on the Wireless device you are adding to your wireless network. 4.Select Manual as the configuration method to set up your network manually.Click Next to [...]

[...] connection point for any computer (client) that has a 802.11n or backward-compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network [...]

[...] your smartphone or tablet is connected to the camera’s Wi-Fi signal (not your wireless router). •The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a 4-digit code [...]

[...] inside the device. D-Link offers a simple utility for establishing a connection to your wireless router: The utility reports the status of your connection, notes which channel it’s [...]

[...] the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all [...]

[...] Baby app is installed, simply tap on the icon to open the app. The next screen you see is the Setup Wizard. Click Setup to launch the Setup Wizard and configure your camera. The wizard will guide you [...]

[...] on the DIR-505-á to Router/AP mode and power on the device. Step 2: Run the setup wizard in the DIR-505′s Web Interface to select whether you want to use Router or Access [...]

[...] automatically broadcasts requests for network information. If you want to use a static IP address, you must disable the DHCP client and manually configure the IP address and other [...]

[...] DGL-5500L If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Windows® 8 Users • Press the Windows key and [...]

[...] automatically broadcasts requests for network information. If you want to use a static IP address, you must disable the DHCP client and manually configure the IP address and other [...]

[...] ) that is located on your configuration note (ex: dlink-a8fa). Then, enter the Wi-Fi password which is also located on your configuration note. (ex: akbdj19368). 3.Open a web [...]

[...] (SSID) as listed on the supplied info card. Select and then enter your security password (Wi-Fi Password). Step 3: Once you connect to the router, launch the QRS mobile app and it will guide you [...]

[...] , refer to the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password. You can also connect using WPS: 1. Press the WPS button on the DGL-5500L for three seconds. [...]

[...] the Wi-Fi name that is shown on your companion card (ex: dlink-a8fa). Then, enter the Wi-Fi password included in your card (ex:akbdj19368). 4.Once it connected, click on the QRS Mobile [...]