PROJECTS FOR FINAL YEAR DIPLOMA|ENGINEERING|BSC|MCA STUDENTS

[...] for Programming AT89C2051 20P packages - Extra Not included in This Package   For Enquiry Phone: 91-80-4096-9981 Mobile: 91-9008001602 , 91-9886490456. Email: info@technofist.com Website: [...]

[...] is sent by the identified transmitter while the server starts to record the data  For Enquiry Phone: 91-9611145044 Email: info@embeddedkits.in Website: www.embeddedkits.in [...]

[...] is protected by sensors. So this application can be extended for the blind persons.  For Enquiry Phone: 91-9611145044 Email: info@embeddedkits.in Website: www.embeddedkits.in [...]

[...] send SMS is sent to the mobile number which is stored in the controller programming.  For Enquiry Phone: 91-9611145044 Email: info@embeddedkits.in Website: www.embeddedkits.in [...]

[...] minute. An increase or decrease in this value will be considered as abnormal condition. The temperature sensor is provided to sense the body temperature of the patient. The output of both sensors is [...]

[...] APPLICATION “will control drug injection speed depending upon the patient’s state. Our temperature sensor will senses the temperature and gives corresponding analog voltage to signal conditioning, [...]

[...] WEATHER MONITORING”.   According to the situation our controller monitors the temperature sensor and humidity sensor. Initially temperature sensor will be in ON condition to monitor the [...]

[...] The temperature sensor, eyeball sensor, heartbeat sensors are fixed on the human body for inertial sensing. The [...]

[...] examined are the temperature, heartbeat and  the pressure is monitored by use of (real time monolithic sensor), since the real time monitors are significantly much costly, the temperature or [...]

[...] examined are the temperature, heartbeat and  the pressure is monitored by use of (real time monolithic sensor), since the real time monitors are significantly much costly, the temperature or [...]

[...] to the microcontroller through the interfacing circuit, and these parameters are displayed on LCD display. The data is transmitted through the RF transmitter at the frequency of 433.92 MHz. In our [...]

[...] ; These human value parameters are monitored (i.e. Blood Pressure, Pulse and Temperature) via LCD Display. [...]

[...] good repeatability over the entire operating zone. The measured flow rate is displayed through LCD display. This project is use to find out the density of the given liquid and also to find out the [...]

[...] ;.   According to the situation our controller monitors the temperature sensor and humidity sensor. Initially temperature sensor will be in ON condition to monitor the temperature, if the [...]

[...] ”.   According to the situation our controller monitors the temperature sensor and humidity sensor. Initially temperature sensor will be in ON condition to monitor the temperature, if the [...]

[...] is one of the advanced methods of protection technique. In our project we are using the 8bit microcontroller for all controls and operations. We are using the PC for the monitoring purpose. If any [...]

[...] through the RF transmitter at the frequency of 433.92 MHz. In our project we are using the 8bit microcontroller for all controls and operations. In the receiver end the data are retrieved by using RF [...]

[...] is one of the advanced methods of protection technique. In our project we are using the 8bit microcontroller for all controls and operations. We are using the PC for the monitoring purpose. If any [...]

[...] through the RF transmitter at the frequency of 433.92 MHz. In our project we are using the 8bit microcontroller for all controls and operations. In the receiver end the data are retrieved by using RF [...]

[...] detected, the sensor sends signal to the controller, which transmits the information through RF transmitter. At the receiver end the data can be received by the controller by using RF receiver and [...]

[...] , and these parameters are displayed on LCD display. The data is transmitted through the RF transmitter at the frequency of 433.92 MHz. In our project we are using the 8bit microcontroller for all [...]

[...] , and these parameters are displayed on LCD display. The data is transmitted through the RF transmitter at the frequency of 433.92 MHz. In our project we are using the 8bit microcontroller for all [...]

[...] ;         In the proposed architecture, each deployed ZigBee sensor or device periodically sends a packet containing its profile to the coordinator to announce [...]

[...] ;         In the proposed architecture, each deployed ZigBee sensor or device periodically sends a packet containing its profile to the coordinator to announce [...]

[...] the data from the sensors through an embedded controller. The data transferred from the sensing unit is received in the remote terminal unit if both the device is in the specified range of the RF [...]

[...] the data from the sensors through an embedded controller. The data transferred from the sensing unit is received in the remote terminal unit if both the device is in the specified range of the RF [...]