SOLIDWORKS DESIGN SIMPLE TUTORIAL

?

Channel Reputation Rank

#1470
?

Activity Status

Stale

last updated

According to the data and stats that were collected, 'SOLIDWORKS DESIGN SIMPLE TUTORIAL' channel has a mediocre rank. The feed was last updated more than a year ago. In addition 'SOLIDWORKS DESIGN SIMPLE TUTORIAL' includes a significant share of images in comparison to the text content. The channel mostly uses long articles along with sentence constructions of the intermediate readability level, which is a result that may indicate difficult texts on the channel, probably due to a big amount of industrial or scientific terms.

? Updates History Monthly Yearly
? Content Ratio
? Average Article Length

Medium-length materials prevail on 'SOLIDWORKS DESIGN SIMPLE TUTORIAL' that may be an effective tactic to grip their readers’ attention with a wider range of helpful content. There are also longer items making up more than a quarter of all articles, which can provide a deeper insight into their subjects. Moreover, there are a few short articles.

short

long

? Readability Level

Intermediate readability level is common for 'SOLIDWORKS DESIGN SIMPLE TUTORIAL' articles as it addresses the matters that demand certain level of education to be understood. Sometimes the channel gets even more difficult by issuing pieces of advanced readability level (there are just a few of them). In addition the channel contains materials of a basic readability level, making up more than a quarter of its content.

advanced

basic

? Sentiment Analysis

Neutral sentiment normally indicates an unbiased attitude that prevails in the channel’s articles (e.g. it may include some kind of scientific or professional materials).

positive

negative

Recent News

Unfortunately SOLIDWORKS DESIGN SIMPLE TUTORIAL has no news yet.

But you may check out related channels listed below.

Measure tool is very useful and frequently used in designing

[...] automatically. steps we have to do, Select the item to be measured. Callouts appear in the graphics area. The new measurement will always be updated dynamically appear when we change the selection. [...]

Measure tool is very useful and frequently used in designing

[...] automatically. steps we have to do, Select the item to be measured. Callouts appear in the graphics area. The new measurement will always be updated dynamically appear when we change the selection. [...]

Swept Surface

[...] Curves, do the following: Select the Guide Curves in the graphics area. Click Move Up or Move Down to change the order in which to use the guide curves. If necessary, [...]

Swept Boss Base on SOLIDWORKS

[...] follow. Use the sketch, existing model edges, or curves. Click the Swept Boss / Base on the Features toolbar, or Insert, Boss / Base, Sweep Swept Cut on the Features toolbar, or Insert, Cut, Sweep [...]

Scale a solid part

[...] , or both, of the guide curves and the profiles. Click one of the following: Loft on the Features toolbar or Insert, Boss/Base, Loft In the PropertyManager: Select the profiles to loft in the [...]

Cut extrude - Up to Surface

[...] a sketch on the plane 7. Sketch the conditions must be closed. Click Extruded Cut on the Features toolbar, or click Insert, Cut, Extrude Set PropertyManager options. Set initial conditions for the [...]

Knit Surface

[...] modify the tolerance gaps knit. To make the knit surfaces: Click Knit Surface on the Surfaces toolbar, or click Insert, Surface, Knit. In the PropertyManager, Select the surface of [...]

Fill cracks with fill Surface

[...] curvature to control the different types of boundary edges. Click Filled Surface on the Surfaces toolbar, or Insert> Surface> Fill. In the graphics area, under Boundary Patch, select the [...]

Trim surfaces

[...] surface that intersects with a plane or has a sketch on its face. Click Trim Surface on the Surfaces toolbar, or click Insert, Surface, Trim. In the PropertyManager, under Trim Type, select a type: [...]

Swept Surface

[...] or pierce relations between the guide curves and the profile. -Click Swept Surface on the Surfaces toolbar or click Insert, Surface, Sweep. -Under Profile and Path, do the following: Click Profile [...]

Learn to make the Round Table

[...] with a diameter of 15 sketches, the top plane. Step 4. Boss-Extrude2, to make the pole table. Click Insert> Boss> Extrude From the property manager, Direction 1 select the Up to Surface select [...]

Swept Surface

[...] between the guide curves and the profile. -Click Swept Surface on the Surfaces toolbar or click Insert, Surface, Sweep. -Under Profile and Path, do the following: Click Profile and select the [...]

Creating a Circular Pattern Sketch

[...] with the original reference point. It points to consider are: Entities to Pattern Select the sketch entity that we want to make a circular pattern parameter reverse direction Choose a pattern center: [...]

Trim surfaces

[...] these options: Trim tool (available with Standard selected under Trim Type). Select a surface, sketch entity, curve, or plane in the graphics area as the tool that trims other surfaces. Surfaces ( [...]

To copy sketch entities

[...] In an open sketch, click Copy Entities on the Sketch toolbar, or click Tools, Sketch Tools, Move or Copy. To copy the sketch entities, in the [...]

Sketch on the model faces

[...] the planar face of a model where we want to make a sketch. 2. Click the Sketch tool on the toolbar sketch, click Sketch, or click Insert, Sketch. The following occurs: • box will appear on the face [...]

Sketch on the model faces

[...] the planar face of a model where we want to make a sketch. 2. Click the Sketch tool on the toolbar sketch, click Sketch, or click Insert, Sketch. The following occurs: • box will appear on the [...]

Sketch on the model faces

[...] of a model where we want to make a sketch. 2. Click the Sketch tool on the toolbar sketch, click Sketch, or click Insert, Sketch. The following occurs: • box will appear on the face that we choose ( [...]

Sketch on the model faces

[...] of a model where we want to make a sketch. 2. Click the Sketch tool on the toolbar sketch, click Sketch, or click Insert, Sketch. The following occurs: • box will appear on the face that we [...]

?Key Phrases
Measure tool is very useful and frequently used in designing

[...] automatically. steps we have to do, Select the item to be measured. Callouts appear in the graphics area. The new measurement will always be updated dynamically appear when we change the selection. [...]

Measure tool is very useful and frequently used in designing

[...] automatically. steps we have to do, Select the item to be measured. Callouts appear in the graphics area. The new measurement will always be updated dynamically appear when we change the selection. [...]

Swept Surface

[...] Curves, do the following: Select the Guide Curves in the graphics area. Click Move Up or Move Down to change the order in which to use the guide curves. If necessary, [...]

? Locations

Related channels